Calmont Wire and Cable

combines Calmont's precision extrusion techniques with the superior properties of FEP Teflon® and the durability of a highly stranded conductor to produce an unequaled product. It is small and lightweight, yet will withstand the severe and repeated flexing that usually destroys other fluorocarbon insulated wires.

Tefzel™ insulation can also be used in the construction of Fluoroflex resulting in a temperature range of -65°C to 150°C. Contact Calmont for further electrical and mechanical specifications.

FEATURES	APPLICATIONS
Low co-efficient of friction High flexural fatigue life Will not out-gas Electrically stable Wide temperature usage range (-150°C to 200°C) Flame resistant	Versatile, suitable for broad usage Medical implantation requiring chemically inert insulating materials. Aerospace applications requiring small diameter and low smoke characteristics. Computer applications requiring superior dielectric properties.

Electrical Properties

DC Volume Resistivity (ohm-CM)

2 x 10¹⁸

Dielectric Strength (VPM on 0.125 slab)

600

Dielectric Constant at:

60 Hz
10³ Hz
10⁶ Hz

2.1
2.1
2.1

Dissipation Factor at:

60 Hz
10³ Hz
10⁶ Hz

0.0003
0.0003
0.0007

Physical Properties

Specific Gravity

2.13 - 2.20

Specification Volume (cubic inches/pound)

13.2 - 12.6

Elongation (%)

250 - 330

Shore Hardness (D Scale)

Burning Rate

Thermal Properties

Temperature Rating (Severe & Repeated Flexing)

-150°C to 200°C

Temperature Rating (Limited Flexing)

From -268°C

Shield Style	Jacket Style	Conductor Type
U = No Shield T = Tin Plated Copper S = Silver Plated Copper N = Nickel Plated Copper	0 = No Jacket 1 = Extruded PVC (Gray pref.) 2 = Extruded Nylon (Clear pref.) 3 = Extruded FEP (Black pref.) 4 = Extruded Silicon Rubber (White pref.)	BC = Bare Copper SPC = Silver Plated Copper TC = Tin Plated Copper

HOW TO ORDER
3006024 Calmont Spec.	-26 AWG Size	-3 No. Cond.	-0/1/2 Primary Insulation Colors (MIL-STD-681) Base Colors Only (Black preferred)	-S Shield Style	-3 Jacket Style	-BC Conductor Type